Loctite 638, 50 ML Adhesive
Loctite 638, 50 ML Adhesive
Confirma disponibilidad, instalación y entrega con un asesor.
Descripción
Loctite 638, 50 ML Adhesive Features Anaerobic adhesives are used as a curing agent in fiber connector termination, especially in field installation and terminations due to its fast curing time. LOCTITE® 638 can be used with Loctite 7649 Primer to increase cure speed. Anaerobic adhesives should only be used with optic connectors that have a ceramic (zirconia) ferrule and a metal ferrule holder. Application Method; Inject Loctite 638 into the connector with a syringe needle Dip or spray the fiber and buffer with activator Loctite 7649 and connectorize as usual. Allow 30-45 seconds for the activator to dry. *** If an accelerator is not used, the hardening time may be long depending on the ambient temperature. Loctite 7649 is recommended. Loctite Adhesive and Activator | Datasheet
Especificaciones técnicas
Consulta las características del producto con uno de nuestros asesores.